Research Publications
Go MPAE Division Page
Papers published in refereed
Journals
1991
Shailender K.J. Gulkhov A.B. & Uzunyan M.D.,
"The Theoretical Analysis of Grains' Height Differences on the Wheel
Surface", Cutting & Tools, Issue 45, 1991, pp. 48-52.
Shailendra K.J. Uzunyan M.D., "Work performance
of Diamond Wheels under Electro-Discharge Grinding of Binary Materials".
Cutting & tools, Issue 46, 1991, pp. 48-52.
Uzunyan M.D., Shailendra K.J. "High Capacity
Grinding and Workability Criteria of Hard Metals". Scientific Society
of Mechanical Engg. N 8-9, 1991, Budapest, pp.348-351.
2000
"Electro Chemical spark Trepanning of Alumina
and Quark" by Jain and Chak (MST 69-98) is accepted and would be
appear in the forth coming issue Vol 4 (2) of the Journal Machining
Science and Technology, June 19, 2000.
2001
R. Purohit and R. Sagar, "Fabrication of a Cam
using Metal Matrix Composites", The International Journal of Advanced
Manufacturing Technology, Vol. 17, 2001, pp. 644-648.
2004
Shankar Singh, S. Maheshwari
and P.C. Pandey, 'Some investigations on electric discharge machining
of hardened tool steels using different electrodes, 'Journal of
Materials Processing Technology' Vol. 149 issue 1-3, 2004, pp. 272-277.
Go Top
Publication of Books/Books
chapters
Papers presented/published in conference/symposia
1988
D.K. Singh and A.P. Mehta ""By-pass Factor for
dehumidifying Coil" - Eight National Symposium on Refrigeration
and 'Air-conditioning. IIT Kanpur. Feb 26-27. 1988.
1991
D.K. Singh and A.P. Mehta "Scope of Energy Conservation
in Lighting" - All India Seminar on Thermal Insulation and Other
Devices for Conservation of Energy. Institution of Engineers. New
Delhi. October 9-10. 1991.
A.P. Mehta and D.K.Singh "Quality Control in
Development of Balancing Value" - National Seminar on Energy Conservation
and Management REC Kurukshetra. October 10-11. 1991.
Shailendra K.J. Uzunyan M.D., "Comparative machinability
of Nontungsten Hard Alloys". International Scientific & Technical
Seminar on "problem of material machining in the modern manufacturing
area, Vol.2, 1991, Kharkov, Ukraine, pp. 146-150
1992
Shailendra K.J. Rudnev A.B., Uzunyan M.D., "Interaction
Peculiarities of Diamond Wheel and Synthetic Polycrystal Biplate
composite Materials Based on compact Modification of Boron nitride
(Tomal - 10) under the Process of Electro-discharge Grinding, "International
Scientific and technical Seminar on "High technology in machine
building" These of reports, 1992, Alushta, Ukraine, pp. 184-186.
D.K.Singh "Threats of Ozone Depletion and Environment
Degradation" 10th ISME conference on Mechanical Engineering., DCE
Delhi, December 9-11, 1992.
D.K. Singh "Energy-Potential and Conservation"
- National Solar Energy Conservation. IIT Delhi. December 28-30.
1992.
D.k.Singh "Renewable Energy. The Last Resort"
- National Solar Energy Convention. IIT Delhi. December 28-30. 1992.
1996
Maheshwari Sachin Pandey Sunil, 'Element transfer
behaviour of fluxes during submerged are welding', International
Symposium on 50 years of Metallurgy: Retrospect & Prospect,
organised by Indian Institute of Metals, New Delhi, Nov 14-18, 1996.
Maheshwari Sachin, Pandey Sunil, 'Effect of
flux ingredients on weld metal composition" Xth ISME conference
on Mechanical Engineering, New Delhi, December 9-11, 1996.
Aditya Kumar, T.P. Ghosh, A comparison of two
concepts of friction in metal forming Analysis. Tribo-Tech 96, Feb
23-24, 1996.
1997
Maheshwari Sachin, Pandey Sunil, 'Design of
flux formulations for general purpose submerged are welding of low
carbon steel. 'Conference on 'Emerging trends in welding technology'
organised by Indian Institute of Welding at hotel Hyatt Regency
New Delhi, Feb 8, 1997.
Maheshwari Sachin, Pandey Sunil, 'Power Source
behaviour and prediction of welding current in submerged are welding'.
Conference on 'Emerging trends in welding technology'organised by
Indian Institute of Welding at hotel Hyatt Regecny New Delhi, Feb
8, 1997.
Maheshwari Sachin, Pandey Sunil, 'Charge in
weld metal composition during submerged are welding as a function
of electrochemical reactions'. NWS' 97, International conference
organised by Indian Institute of Welding at IISc Bangalore, Dec
11-13, 1997.
1998
Maheshwari Sachin,, Pandey Sunil, 'Development
of Computer Integrated System for Metal Transfer Analysis During
Welding'. Conference on 'Emerging trends in welding technology'
organised by Indian Institute of Welding at hotel Hyatt Regency
New Delhi, Feb 14, 1998.
1999
Maheshwari Sachin,Pandey Sunil, 'Development
of Real Time Recording Facility for V-I Transients to Study the
Effect of Flux Constituents during Submerged Are Welding', International
Welding Conference on Welding & Allied Technology, Organised
by the Indian Institute of Welding in association with Confederation
of Indian Industry, New Delhi, 15-17 February 1999.
2001
Shankar Singh and N.D. Sharma, 'Electrical discharge
machining of En-354 steel with different electrodes', Proceedings
of 12th ISME (Indian Society of Mechanical Engineers) Crescent Engg.
College, Chennai, 10-12th Jan'2001, pp. 232-240. Presentation was
also done.
Shankar Singh and R.V. Rao, 'Study of some aspects
in electric discharge machining of hardened En - 354 steel using
different electrode materials', Proceedings of XIII ISEM (13th International
Symposium for Electro Machining), Bilbao, Spain, 9-11th May 2001,
pp. 661-673.
R. Sagar, R. Purohit, R. Kumar, C.R. Meena and
A.K. Shukla, "Agile manufacturing, design and analysis of guides
for poppet valves", 8th ISPE International Conference on Concurrent
Engineering: Research and Applications, Anaheim, California, 28th
July-1st Aug.,2001, pp.760-769.
2002
Rajesh Purohit, Pramod Sahu and Rakesh Sagar,
"Design and fabrication of various powders", International Conference
on Po9wder Metallurgy for Automotive Components and 28th annual
Technical meeting of PMAI on Powder Metallurgy and Particulate Materials,
January 22-24, 2002, India Habitat Centre, New Delhi, (presented)
Rajesh Purohit and Rakesh Sagar, "Modeling and
simulation of press forming of aluminum 5 weight % SiCp composites",
International Conference on powder metallurgy for Automotive Components
and 28th annual Technical Meeting of PMAI on Powder Metallurgy and
particulate Materials, January 22-24, 2002, India Habitat Centre,
New Delhi, (presented)
R. Purohit, G. Hemath Kumar and R. Sagar "Fabrication
and wear testing of aluminum based metal matrix composite automotive
parts", National Seminar on Emerging Trends in Manufacturing, Proceedings
of XVI National Convention of Production Engineers, January 19-20,
2002, IT BHU, Varanasi, pp. 495-500.
Shankar Singh and P.C. Pandey, 'Surface finish
quality after electric discharge machining - a review', Proceedings
SECTAS - 2002 (National Seminar on Emerging Convergent Technologies
and Systems), Faculty of Engg., Dyalbagh Educational Institute,
Agra, 1st-2nd March, 2002, pp. 462-467. Presentation was also done.
Shankar Singh, P.C. Pandey and S. Maheshwari,
Thermo mathematical models for Electric discharge machining: an
overview, Proceedings 2nd International conference on Manufacturing,
ICM-2002, Dhaka, Bangladesh, 9-11th August 2002, vol. I, pp. 492-500.
Shankar Singh, P.C. Pandey and S. Maheshwari,
'Role of information technology in manufacturing' Proceedings 2nd
International Conference on Manufacturing, ICM 2002, Dhaka, Bangladesh,
9-11th August 2002, vol. I, pp. 686-692.
R. Purohit, A.K. Das and R. Sagar, "Microstructure
and fractographic study of ALSiCp composites", Conference on Progress
in composite Materials, October 18-19, 2002, Mumbai, (accepted).
R. Purohit, A. K. Das and R. Sagar, "Rolling
of AI-SiCp Composites", Conference on progress in composite Materials,.
October 18-19,2002, Mumbai, (accepted).
2003
Shankar Singh, S. Maheshwari and P.C. Pandey, 'Abrasive Electro-discharge
Machining - An Innovative Technique in Hybrid Machining', Proc.
National Conference on 'World Class Manufacturing', Amrita Institute
of Technology, Coimbatore, pp. 01-06, May 7 -9, 2003.
P.K.Chaudhary, M.Agarwal, V.Lal, S. Maheshwari
and Shankar Singh, 'Knowledge based CAD systems' e- Proceedings,
International Conference on CAD, CAM, Robotics and Autonomous Factories,
Indian Institute of Technology, Delhi, Aug. 11-13, 2003.
Shankar Singh, S. Maheshwari and P.C. Pandey,
'Analysis of the abrasive electro-discharge machining (AEDM) for
machining of advanced materials', Proc. National Conference on Recent
Developments in Mechanical Engineering (NCME 2003), Thapar Institute
Engineering & Technology, Patiala, pp. 610-614, Oct. 31st-Nov.
1st, 2003.
Shankar Singh, S. Maheshwari and Jagdev Singh,
'Taguchi approach and design of experiments for robust design: an
overview', Proc. National Conference on Recent Developments in Mechanical
Engineering (NCME 2003), Thapar Institute Engineering & Technology,
Patiala, pp. 335-338, Oct. 31st-Nov. 1st, 2003.
2004
Shankar Singh, S. Maheshwari
and P.C. Pandey, 'Some investigations on electric discharge machining
of hardened tool steels using different electrodes,' (Ref. IS 37)
accepted for presentation & publication in the proceedings at
-14th International Symposium on Electromachining (ISEM XIV), Edinburgh,
Scotland, 30 March - 1 April 2004.
Shankar Singh , S. Maheshwari, Alok Dey, et.al., ‘Electrical Discharge Machining of Aluminium Matrix Composites’ (paper no. M-15), Proceedings, International Conference on Recent Advances in Composite Materials (ICRACM 2004), Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University, Varanasi - 221 005, India, December 17-19, 2004, pp. 459-463.
Ankur Jain, Alok Rustagi and Shankar Singh , ‘Some Investigations into the Electric Discharge Machining of En-353 Steel with Different Electrode Materials’,(paper no. M-20), Proceedings, International Conference on Recent Advances in Composite Materials (ICRACM 2004), Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University, Varanasi - 221 005, India, December 17-19, 2004, pp. 525-529.
2005
Shankar Singh, S. Maheshwari, P.C. Pandey, and Alok Dey,‘ Electrical Discharge Machining of Particle Reinforced Metal Matrix Composite’ , Proceedings, National Conference on “Advances in Manufacturing Technology in the Era of Globalisation (AMTEG – 2005), Department of Production Engineering, Pune Institute of Engineering Technology (formerly Govt. College of Engineering, Pune),Pune-411 005 ,January 21-22, 2005, pp. 311-316.
Go Top
Publication by students of the Division of
Manufacturing Process and Automation Engineering
Go MPAE Division Page
Go Top
|
